Reply to thread

Message: [QUOTE="Shamiso, post: 93958, member: 160"] Micron's G11 3D NAND is aiming for more than 400 memory layers, with mass production planned for the latter half of 2027. The chipmaker expects a major jump in storage density, faster data transfers, and less energy use. For SSD fans, the numbers look promising, but retail hardware has yet to prove any of it. Density is the big talking point here. G11 aims for 42 Gb/mm², compared with roughly 21 Gb/mm² on G9. That's double the amount of data per unit of chip area, at least on paper. Higher density could help pack more storage into the same space. Interface speeds are getting attention as well. Micron wants G11 to reach 5,400 MT/s, compared with 3,600 MT/s on its older tech. That's a 50% gain at the memory interface. Energy spent moving each bit should also drop by over 25%, based on company targets. Here's the nerdy part. G11 will use wafer-on-wafer bonding, which joins memory structures and their support circuits at the wafer level. This method gives Micron more options for how it builds its chips. The firm also believes the process can make business sense at the right cost. Actual production economics remain a bit of a mystery, though. Micron hasn't shared the full factory process or a detailed cost figure for each stored bit. That leaves questions about manufacturing yields and whether the method will deliver its planned gains at scale. For SSD makers, denser memory could mean larger drives without needing more physical space. Another option is using fewer chips to reach a set capacity. Neither result is certain, since durability, controller support, and production quality still matter. And no, a faster NAND interface doesn't mean every SSD gets a 50% speed boost. Controllers, firmware, memory channels, onboard cache, and heat can all affect how a drive runs. Small random reads may also see different gains than large file transfers. Power savings have their appeal, particularly for data centers with lots of storage and mobile devices where battery life matters. Yet nobody has shown finished G11 drives with tested power figures. The chip-level energy target still needs proof in actual products. Availability is another catch. A factory starting high-volume output doesn't mean new SSDs will hit store shelves at once. Enterprise buyers and regular PC users may see the tech at different stages, depending on how quickly manufacturers adopt it. For the time being, G11 remains a roadmap project with specific goals rather than a finished consumer upgrade. Working samples, compatible controllers, and independent drive tests will show whether Micron can deliver on those targets. [/QUOTE]

Name