Reply to thread

Message: [QUOTE="Mpumelelo von Mumhanzi, post: 15789, member: 2173"] I will just translate to iZotope Ozone EQs. But that doesn't mean iZotope EQs will sound like a Sontec even though the EQ curves will snap precisely. Sometimes it slightly varies when you compare two Sontecs side by side. Anyways... [TABLE] [TR] [TH][CENTER]Sontec[/CENTER][/TH] [TH][CENTER]iZotope Ozone/Neutron[/CENTER][/TH] [/TR] [TR] [TD]5 (dB per octave)[/TD] [TD]0.58[/TD] [/TR] [TR] [TD]6 (dB per octave)[/TD] [TD]0.92[/TD] [/TR] [TR] [TD]9 (dB per octave)[/TD] [TD]1.58[/TD] [/TR] [TR] [TD]11 (dB per octave)[/TD] [TD]1.95[/TD] [/TR] [TR] [TD]15 (dB per octave)[/TD] [TD]2.85[/TD] [/TR] [/TABLE] N.B., use Ozone's EQ analog regular bell curves instead of the proportional bell curves for best results. And if you wanna use Ozone EQ's digital mode just make sure it's set completely to minimum phase (i.e. 100% on that slider whatever. I can't remember what it's called from the top of my head) instead of linear phase or mixed phase mode—that's it really, you are good to go. [TABLE] [TR] [TH][CENTER]Sontec bottom shelf[/CENTER][/TH] [TH][CENTER]iZotope Ozone Equalizer (Baxandall shelf)[/CENTER][/TH] [/TR] [TR] [TD]50 Hz[/TD] [TD]130 Hz[/TD] [/TR] [TR] [TD]100 Hz[/TD] [TD]200 Hz // this is also quite similar to a Pultec EQ @ 20 Hz[/TD] [/TR] [/TABLE] [LIST] [*]100 Hz on Sontec is also slightly similar to a Bax EQ at 131 Hertz except the latter has a dip of -0.5 dB at 400 Hz, Q 0.7071 [*]What some people call a Baxandall shelf is simply a first-order shelving filter you can do that with any contemporary digital EQ. [/LIST] [TABLE] [TR] [TH]Sontec top shelf[/TH] [TH]iZotope Ozone Equalizer (Baxandall shelf)[/TH] [/TR] [TR] [TD]It's fixed[/TD] [TD]3.7 kHz[/TD] [/TR] [/TABLE] [/QUOTE]

Name