Latest activity
-
Mid is half of left plus right, side is half of left minus right, and any mono fold-down discards the side channel completely. That is... -
-
At listening levels around 80 dB, most people can detect a level change of about half a decibel, and below 40 dB they need three times...
-
-
Universal Audio shipped the first Dangerous BAX EQ plugin in February 2014, built by Brainworx with Dangerous Music Digital and priced...
-
-
Peter Baxandall published his negative-feedback tone control circuit in October 1952, and within a few years it had pushed every rival...
-
-
Stevie Wonder's "Superstition" hit number one on the Billboard Hot 100 on January 27, 1973, carried by a clavinet riff doing a guitar's...
-
-
Hohner built around 38,000 Clavinets between 1964 and 1982, and every one of them makes its sound by slamming a small rubber pad into a...
-
-
A 24-bit file holds about 144.5 dB of dynamic range, while 32-bit float holds a theoretical 1528 dB and keeps everything above 0 dBFS...
-
-
Queen posted the thread Unlinking left and right quietly moves your center image in Jinaral kantent.Your ears resolve a level difference between them of about 1 dB, which is finer than most people assume, and finer than many unlinked...
-
-
Pro Tools clip gain adjusts a clip anywhere from -144 dB up to +36 dB, while the volume fader tops out at +12. That range gap is not a...
-
-
ITU-R BS.1770-5 requires a true-peak meter to run at four times oversampling, and even at that rate the standard admits an under-read of...
-
-
A single 30 Hz cycle takes 33 milliseconds to complete, over 300 times longer than one cycle at 10 kHz, and your limiter feels every bit...
-
-
In Wwise, a sound only reaches the system as its own audio object when it has a 3D position, full spatialization, and a free object...
-
-
Apple requires a separate stereo master alongside every Dolby Atmos delivery, conformed and synced to within 50 milliseconds of the...
-
-
Dolby's binaural renderer offers four distance settings for every bed channel and object, and one of them, Off, applies no spatial...
-
-
The Dolby Atmos renderer accepts 128 inputs in total, and a full 7.1.2 bed eats ten of them before you place a single instrument. That...
-
-
Blackstar shipped the first amp to load NAM captures natively on May 5, 2026, three months before HeadRush's firmware landed. So...
-
-
Neural Amp Modeler's second architecture landed on June 2, 2026, and HeadRush shipped support for it two months later in firmware 5.1.0...
-
-
HeadRush firmware 5.1.0 added a new ReValver amp, a graphic bass EQ, gain reduction meters, phase invert, and four other changes nobody...
-
-
HeadRush's own release notes for firmware 5.1.0 open by telling you to back up every rig, setlist, model preset, clone, loop, and...
-
-
HeadRush firmware 5.1.0 loads one NAM capture per rig, so every rig you build now starts with a decision about which amp deserves that...
-
