Audient overhauls iD interfaces with onboard DSP and room correction

Audient has introduced four new iD MK3 audio interfaces, with room correction and analog sound tools built into each unit. The lineup has the iD1, iD2, iD2+, and iD4+, all aimed at music makers who need different levels of studio gear without giving up the same core audio quality.

The big change is Analogue Intelligence, a new tech platform that pairs real analog circuits with built-in digital processing. Audient took its mic preamp design from the ASP8024-HE console and added 75dB of clean gain. Every model also gets 32-bit conversion, 128dB of dynamic range, and sample rates up to 192kHz.

RoomTune is a neat part of the setup. It uses the interface hardware to help fix how speakers sound in a room, with no DAW plugin or extra CPU load. Even audio from apps such as Spotify gets the same correction. A matched RM1 mic is needed to set it up, though.

That mic comes with the iD2+ and iD4+, while buyers of the other two units need to get it separately. Stereo speaker correction is ready at launch, with support for headphones and more target curves planned as free updates.

Then there's the Analogue Tone Suite. Orbit changes mic impedance to alter its character, while HMX adds harmonic color through a MOSFET circuit. LIFT gives the high end a boost, and GLOW blends that lift with HMX saturation. All four work on the signal before it gets to the DAW.

Onboard DSP handles EQ, compression, and reverb as well, with Audient claiming zero latency. Smartgain can help set input levels, and users can recall analog settings for past sessions. Every interface runs on USB-C power, with no wall adapter needed.

For solo acts, the iD1 has two inputs and two outputs, with a mic preamp and a JFET guitar input that work at once. The iD2 steps up to 10 inputs and six outputs, adds a second mic preamp, and gives users ADAT expansion and control for two sets of speakers.

The iD2+ goes further with 10 inputs and 14 outputs. It has two balanced inserts for external gear, along with eight ADAT channels in each direction. The iD4+ reaches 20 inputs and 24 outputs, with four mic preamps, dual JFET inputs, 16-channel ADAT input and output, and two headphone amps that can serve up to four cue mixes.

Audient has cleaned up the names as well. The old iD4, iD14, iD24, and iD44 models map to the new iD1, iD2, iD2+, and iD4+. The number points to the mic preamp count, while the higher-spec models add more ways to connect studio hardware.

A fresh case design rounds things out. Each unit has a sloped control panel, a metal knob with clear steps for repeatable settings, and lit meters that stay easy to read in dim rooms. Mac and Windows support is standard across the range.
 

Attachments

  • Audient overhauls iD interfaces with onboard DSP and room correction.webp
    Audient overhauls iD interfaces with onboard DSP and room correction.webp
    25.6 KB · Views: 2

Sponsored

Top