HLabs has released the CL089, an analog compressor based on the vintage Studer 089 mixing desk. The new unit takes its design from an old Swiss broadcast console, with PWM gain control and a sound that was once seen as very clean. At £830 or €949, it's aimed at studios keen on classic hardware.
The Studer 089 had a clear purpose when it first appeared. Swiss radio and classical music work called for low distortion, and its compressor used pulse-width modulation to control levels. That was rare in pro audio gear at the time. By modern standards, though, even that clean design has a distinct sonic character.
For the CL089, HLabs has kept much of the vintage circuit intact. The audio runs through analog parts, with most of the build using through-hole components. It's a fairly traditional way to put a unit together, rather than a full digital take on the old gear.
Compression settings stay close to the vintage model. Users get four ratio choices of 1.5:1, 2:1, 5:1, and Limit, along with five release options. A Tandem button lets two units work as a stereo pair, which is handy for processing a full mix or linked channels.
A few modern tweaks make the unit more flexible. HLabs has given it wider input trim and output gain ranges, along with a Slow attack option. There's also a 120Hz high-pass filter in the sidechain, which can help keep bass hits from driving the compressor as hard.
One odd detail is the gain reduction display. Rather than use a meter, HLabs chose a single incandescent bulb. The company admits it isn't a vital feature, but it does give users a visual cue when compression takes place.
The output stage has some care put into it as well. An H101 op-amp, built by HLabs to match the old Studer design, works with a Lundahl LL1588 transformer. The company says that setup gives audio a full, open tone, even when the compressor does little work.
There's room to tweak the hardware, if that's the goal. H101 sits in a socket that accepts 2520-compatible op-amps, letting users try other models for a different sound. HLabs also sells the H101 on its own for use in suitable gear.
The release follows the PRE169 and EQ169, two earlier HLabs units based on the Studer 169 console. CL089 takes the brand further into vintage Swiss studio gear, this time with a focus on dynamics rather than preamp or EQ duties.
The Studer 089 had a clear purpose when it first appeared. Swiss radio and classical music work called for low distortion, and its compressor used pulse-width modulation to control levels. That was rare in pro audio gear at the time. By modern standards, though, even that clean design has a distinct sonic character.
For the CL089, HLabs has kept much of the vintage circuit intact. The audio runs through analog parts, with most of the build using through-hole components. It's a fairly traditional way to put a unit together, rather than a full digital take on the old gear.
Compression settings stay close to the vintage model. Users get four ratio choices of 1.5:1, 2:1, 5:1, and Limit, along with five release options. A Tandem button lets two units work as a stereo pair, which is handy for processing a full mix or linked channels.
A few modern tweaks make the unit more flexible. HLabs has given it wider input trim and output gain ranges, along with a Slow attack option. There's also a 120Hz high-pass filter in the sidechain, which can help keep bass hits from driving the compressor as hard.
One odd detail is the gain reduction display. Rather than use a meter, HLabs chose a single incandescent bulb. The company admits it isn't a vital feature, but it does give users a visual cue when compression takes place.
The output stage has some care put into it as well. An H101 op-amp, built by HLabs to match the old Studer design, works with a Lundahl LL1588 transformer. The company says that setup gives audio a full, open tone, even when the compressor does little work.
There's room to tweak the hardware, if that's the goal. H101 sits in a socket that accepts 2520-compatible op-amps, letting users try other models for a different sound. HLabs also sells the H101 on its own for use in suitable gear.
The release follows the PRE169 and EQ169, two earlier HLabs units based on the Studer 169 console. CL089 takes the brand further into vintage Swiss studio gear, this time with a focus on dynamics rather than preamp or EQ duties.