How do you make an 808 drum sample sit well in a mix?

Numero Uno

grand master
Joined
Mar 14, 2018
Messages
1,652
Solutions
9
Reaction score
37
Points
278
Location
Bulawayo, ZW
What's the process of mixing 808 bass drums to make them fit perfectly fine in a mix?
 
recommended
Mixing 808s kick samples is all about practice and even more practice.

Basically, you might have to reference commercial music releases that have heavy 808 kick drums as basslines.

From there you tweak your 808 kicks to fit the context of the music you are actually mixing while at the same time making them knock harder than the reference track you have been listening to.

But be careful not to overdo it in terms of loudness.
Mixing 808s kick samples is all about practice and even more practice.

Basically, you might have to reference commercial music releases that have heavy 808 kick drums as basslines.

From there you tweak your 808 kicks to fit the context of the music you are actually mixing while at the same time making them knock harder than the reference track you have been listening to.

But be careful not to overdo it in terms of loudness.
 
recommended
Mixing 808s kick samples is all about practice and even more practice.

Basically you have to reference commercial music releases that have heavy 808 kick drums as basslines.

From there you tweak your 808 kicks to fit the context of the music you are actually mixing while at the same time making them knock harder than the reference track you have been listening to.

But be careful not to overdo it in terms of loudness.

What about EQ'ing 808s, what's the sweet spot for getting that nice beefy bass 808 sound?
 
What about EQ'ing 808s, what's the sweet spot for getting that nice beefy bass 808 sound?

Mixing is an art, not a science so the best approach to go around EQ'ing 808 drum samples is to use your eyes.

However, the guideline you could follow to get that beefy sound is to boost with a bell EQ curve at around 80 Hz or even 100 Hz depending on the song of course. Alternatively, you could try somewhere around 50 Hz if you like.
 
Mixing is an art, not a science so the best way to go around EQ'ing 808 drum samples is to use your eyes.

However, the guideline you could follow to get that beefy sound is to boost with a bell EQ at around 80 Hz or even 100 Hz depending on the song of course. Better yet you could try somewhere around 50 Hz if you like.

I will definitely try to put that into practice when mixing 808s.
 
Laik hau?

It means you should decide whether you want your 808 kick drum sample to occupy the deep low-end spectrum (i.e. 31.5 Hz to 80 Hz vs 80 Hz to 160 Hz) or your synth bass it's that simple oan.

In most cases, some mixing engineers will choose the 808 bass to occupy the deep low-end spectrum - just saying!
 
It means you should decide whether you want your 808 kick drum sample to occupy the deep low-end spectrum (i.e. 31.5 Hz to 80 Hz vs 80 Hz to 160 Hz) or your synth bass it's that simple oan.

In most cases, some mixing engineers will choose the 808 bass to occupy the deep low-end spectrum - just saying!
Alright fine, what I should put in my low-end spectrum to fit the general conventions?
 
Alright fine what I should put in my low end spectrum to fit the general conventions?

Look if you are going to follow the general conventions it will be in your best interests to put your 808 bass as your main bassline rather than choosing your synth bass.

At the end of the day, that strictly depends on whether your 808 bass plays more than your synth bass.

In layman terms, if your 808 has more parts than your synth bass then it would make more sense to mix it towards fitting in your deep low-end than your synth bass and vice versa.
 

Trending content

Sponsored

Top